Newport NMI Ventilators | Emergency Preparedness | Homecare Ventilators

1. Interface (Mask/Mouthpiece) Selection

	Focus on comfort and effectiveness usually a smaller mask is easier to manage.
	Start with mouthpiece if the patient has trouble tolerating the mask.
	Gradually move to the interface that balances comfort and effectiveness of ventilation.
	Use only non-vented masks (no holes or valves of any kind)

2. Patient Preparation/Considerations

	Make sure the patient understands what you plan to do.
	Secure the mask to the patient's face, avoiding too tight of a fit.

3. Initial Set-Up

	Humidification: Use a standard humidifier or use an HME/HCH (only if mask fits very well)
	Breathing circuit: Use a single limb or 'J' circuit
	Adjust initial ventilator settings
	Re-adjust settings to balance comfort and effectiveness of ventilation
	Set alarms appropriately
	Set up pulse oximeter

	Any mode and breath type can be used for noninvasive ventilation. Using the HT50, rather than a bilevel pressure device, for NIV means you are not limited to pressure ventilation.
	Keep breathing circuit deadspace minimized to reduce carbon dioxide rebreathing.
	Choose breathing circuits carefully. Many disposable breathing circuits/exhalation valves will not allow the HT50 to function as designed. Use only Newport approved circuits/exhalation valves.

The HT50 Ventilator’s comprehensive, versatile features meet the demands of almost any healthcare setting. Suitable for both pediatric (≥10kg) and adult patients, the HT50 is fully self contained and provides up to 10 hours of operation from its internal battery. Reliable, rugged and portable the HT50 offers patients effective invasive or non-invasive ventilatory support any where they need it – for hospital, home, transport or extended care

	Back to main HT50 page
	View Interactive Guide for the HT50
	Ventilator Specifications



	Copyright © 2009 Newport Medical Instruments. All rights reserved. 1620 Sunflower Ave Costa Mesa, CA 92626, USA Tel: +1 (714) 427-5811 Toll Free: 1 (800) 451-3111 Fax: +1 (714) 427-0489